← back to home FR

Configure le_dns on Your Router

Protect every device on your network at once

Changing DNS on your router is the most powerful option: every device on your network — phones, laptops, smart TVs, IoT gadgets, guest devices — automatically uses le_dns without any per-device configuration.


Before you start

You need access to your router’s admin interface. Typically:


Generic steps (applies to most routers)

  1. Log into your router admin panel
  2. Find DNS settings — usually under one of:
    • WAN / Internet settings
    • DHCP settings (for distributing DNS to local devices)
    • AdvancedDNS
  3. Replace the existing DNS addresses with:
    • Primary DNS: 51.75.96.82
    • Secondary DNS: 51.89.95.33
    • Tertiary DNS (if supported): 151.115.80.165
  4. Save and apply

Fritz!Box

  1. Open InternetAccount InformationDNS rebind protection (optional, can stay enabled)
  2. Go to InternetDNS
  3. Select Use other DNSv4 servers
  4. Set Preferred DNSv4 server: 51.75.96.82
  5. Set Alternative DNSv4 server: 51.89.95.33
  6. Click Apply

Livebox (Orange)

  1. Go to Configuration avancéeRéseauDNS
  2. Replace the ISP DNS entries with:
    • 51.75.96.82
    • 51.89.95.33
  3. Save

Other ISP boxes (SFR, Bouygues, Freebox)

Freebox: Freebox OSParamètres de la FreeboxDHCPDNS

Most ISP boxes have DNS settings under:


A note on encryption

Router-level DNS changes DNS to le_dns, which prevents your ISP from intercepting your queries. However, the connection from your router to le_dns is plain DNS (UDP/TCP port 53) — not encrypted in transit.

For end-to-end encryption, configure DoH or DoT on each device individually. See the DoH setup guide or use the Private DNS setting on Android or a DNS profile on iOS.


Verify it works

From any device on the network, visit dnsleaktest.com. The DNS servers listed should be le_dns. If your ISP’s servers still appear, check that DHCP is distributing the new DNS (you may need to reconnect devices or flush their local DNS cache).